comoc CM1500 V Manual Use And Maintenance - Page 11

Browse online or download pdf Manual Use And Maintenance for Floor Machine comoc CM1500 V. comoc CM1500 V 14 pages.

Print Page

REMOVING THE PAD

To remove the pad bring the handlebar up to vertical by pulling on the
positioning lever. Then tilt the machine back by resting it on the wheels. Use
the specific handle to unscrew the ring that clamps the pad in place and
remove the pad. Now unscrew the fastening screw located in the center of
the pad.
The machine must never remain resting on the pad.
In fact the weight of the machine could permanently deform the pad or the
disk and create vibrations and oscillations when working.
WARNING! Pull the plug out of the power supply outlet
before performing any type of maintenance and at the end of
the work cycle.
WARNING! Abrasive disks can be installed manually only
after pulling the power supply plug out from the power outlet
and only when wearing suitable protective gloves.

AFTER WORK IS TERMINATED

11