Andon KD-322 운영 매뉴얼 - 페이지 12
{카테고리_이름} Andon KD-322에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andon KD-322 14 페이지. Semi automatic arm cuff blood pressure monitor
페이지 인쇄DN:KD-322-SMSY01 V4.0
The KD-322 is intended for use in the electromagnetic environment specified below. The
customer or the user of the KD-322 should assure that it is used in such an environment.
IMMUNITY test
Electrostatic
± 6 kV contact
discharge (ESD)
± 8 kV air
IEC 61000-4-2
Power frequency
3 A/m
(50/60 Hz)
magnetic field
IEC 61000-4-8
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacturer's declaration - electromagnetic immunity
The KD-322 is intended for use in the electromagnetic environment specified below. The
customer or the user of the KD-322 should assure that it is used in such an environment.
IMMUNITY test
IEC 60601test level
Radiated RF
3 V/m 80 MHz to 2.5
IEC 60601test level
Table 3
Compliance
12/14
Compliance level
± 6 kV contact
± 8 kV air
3 A/m
Electromagnetic environment
level
Portable and mobile RF
communications equipment
should be used no closer to any
part of the KD-322, including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance：
Operation Guide
Electromagnetic
environment -
guidance
Floors should be
wood, concrete
or ceramic tile. If
floors are
covered with
synthetic
material, the
relative humidity
should be at least
30 %.
Power frequency
magnetic fields
should be at
levels
characteristic of a
typical location in
a typical
commercial or
hospital
environment.
- guidance
Template version:1