Atlanta BYK byko-cup M 매뉴얼 - 페이지 10

{카테고리_이름} Atlanta BYK byko-cup M에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlanta BYK byko-cup M 20 페이지.

Operation

4. Operation

1. Power on the instrument with the switch

located on the rear panel. Switch on the

magniﬁ er, if required.

2. Rotate the operating handles

counterclockwise (as viewed from the right-

hand side of the instrument) to lower the

hemispherical indenter just below the level

of the bottom clamping ring.

3. Insert the zero plate and rotate the

clamping ring clockwise to securely retain

the plate.

4. Press and hold the button to zero the

instrument's measurement system (zero

position). The display will show:

Touch Zero Plate!

Then Press Button

Lightly hold one of the operating handles

with two ﬁ ngers and slowly turn the

handle counterclockwise (as viewed from

the right-hand side of the instrument)

to raise the hemispherical indenter until

a slight resistance is encountered. When

this position is reached, stop turning;

the Indenter is now in contact with the

underside of the test panel. Press the button

once more to zero the instrument. The

display will now show:

Cupping 0.00

Position 0.00

Cupping

The Cupping display indicates indentation

depth in millimeters.