Compac Micromotion CNG50 매뉴얼 - 페이지 8

{카테고리_이름} Compac Micromotion CNG50에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Compac Micromotion CNG50 13 페이지.

Software Changes

Menu Structure in the K factor Menu

Solenoid Test Function

Error Messages

Compac Industries Ltd.

Unused menu options have been removed and the following menu

structure is all that will be shown:

Density

Set to the local density value

Lo Flo

Normally set to 2.0 for a car dispenser

Hi Flo

Normally set to 30.0 for a car dispenser

Normally set to 0000

Normally set to 00062

As calibration is now carried out in the Micromotion meter

and not in the C4000, there is no K-factor setting available.

To enable the test function, set the b configuration to 0001.

The displays will show Side A/B and the state of the solenoid outputs.

Use the nozzle switch to step through each of the solenoid outputs one

at a time. The display will indicate whether the solenoid number

indicated is off or on.

There are two additional Error Messages Available for the Micromotion

meter

Error 50 - Communications error with CNG50 meter

Error 51 - Meter not ready / Meter error

These codes have not changed from a standard CNG dispenser with

Compac KG80 Meters

Page 8

Software Changes