andover Spinbase 제품 설명서 - 페이지 9

{카테고리_이름} andover Spinbase에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. andover Spinbase 12 페이지.
andover Spinbase에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지)

Using Spinbase

To turn on Spinbase, rotate the central control knob clockwise past the click. The

LED pointer on the knob will illuminate to indicate power is on.

All inputs on Spinbase are always active. It is not necessary to switch between

inputs. Simply start using the source you want to hear, and turn off the source

you don't. You may find this uncommon, but once you become accustomed to it

we believe you will find it to be natural and intuitive.

Connecting Bluetooth Devices

Spinbase is easy to connect. No passwords or codes are required.

•

Turn Spinbase power on.

•

Enter the Bluetooth menu on your phone or other device.

•

Select Spinbase.

•

Once the device indicates it's "connected", you are ready to play.

Please note: If you wish to connect to a different device, you must first "discon-

nect" or "forget" the original device. This must be done from the original device.

Bass & Treble Controls

Bass and Treble controls are located on the back panel and may boost or cut

their respective frequency ranges. The normal position with unaltered response

is indicated by the detent you feel when the controls are centered.

Specifications

Description: Integrated Powered Loudspeaker system with Phono Preamp and Bluetooth

receiver.

Music Power: 36W total (2 x 18W)

Acoustic Frequency range: 65Hz – 20kHz +/- 3dB (under laboratory conditions)

Phono input impedance: 47k / 100pF

Line Input impedance: 20k Ohm

Headphone / Line Output: 105mW @ 16 Ohms. Frequency Response: 20Hz–20kHz

Power Consumption:19VDC / 2A

Weight: 5 kg / 11 lbs

Dimensions: Height:

82.55 mm / 3.25"

Width: 446mm / 18"

Depth: 356mm / 13.5"

Page 9