andover Spinbase Instrukcja obsługi produktu - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Gramofon andover Spinbase. andover Spinbase 12 stron.
Również dla andover Spinbase: Podręcznik szybkiej konfiguracji (2 strony)
Drukuj stronę
Using Spinbase
To turn on Spinbase, rotate the central control knob clockwise past the click. The
LED pointer on the knob will illuminate to indicate power is on.
All inputs on Spinbase are always active. It is not necessary to switch between
inputs. Simply start using the source you want to hear, and turn off the source
you don't. You may find this uncommon, but once you become accustomed to it
we believe you will find it to be natural and intuitive.
Connecting Bluetooth Devices
Spinbase is easy to connect. No passwords or codes are required.
•
Turn Spinbase power on.
•
Enter the Bluetooth menu on your phone or other device.
•
Select Spinbase.
•
Once the device indicates it's "connected", you are ready to play.
Please note: If you wish to connect to a different device, you must first "discon-
nect" or "forget" the original device. This must be done from the original device.
Bass & Treble Controls
Bass and Treble controls are located on the back panel and may boost or cut
their respective frequency ranges. The normal position with unaltered response
is indicated by the detent you feel when the controls are centered.
Specifications
Description: Integrated Powered Loudspeaker system with Phono Preamp and Bluetooth
receiver.
Music Power: 36W total (2 x 18W)
Acoustic Frequency range: 65Hz – 20kHz +/- 3dB (under laboratory conditions)
Phono input impedance: 47k / 100pF
Line Input impedance: 20k Ohm
Headphone / Line Output: 105mW @ 16 Ohms. Frequency Response: 20Hz–20kHz
Power Consumption:19VDC / 2A
Weight: 5 kg / 11 lbs
Dimensions: Height:
82.55 mm / 3.25"
Width: 446mm / 18"
Depth: 356mm / 13.5"
Page 9