3M VersafloS-607 S-707 사용자 지침 - 페이지 5

{카테고리_이름} 3M VersafloS-607 S-707에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M VersafloS-607 S-707 11 페이지. Hoods and headcovers

페이지 인쇄

Connecting the breathing tube

Connect the breathing tube by pushing the QRS (Quick Release Swivel) end of the breathing tube (i.e.

the end with the blue pinch clip) onto the air inlet of the headgear. S-100, S-300, S-400, and S-500

series users see Fig. 5. All other users see Fig. 6. The breathing tube should make an audible click

when attached. Verify breathing tube is secured to the headgear by pulling on the connection.

Fig. 5

Disconnecting the breathing tube

To disconnect the breathing tube, compress the blue pinch clip of the QRS to release and pull back to

remove (Fig. 7).

PAPR/SA Components

Read completely and follow the assembly instructions in the User Instructions provided with your 3M

PAPR (Powered Air Purifying Respirator) blower unit or Supplied Air Unit.

Fig. 4

Fig. 7

Donning & Fitting

Failure to follow these instructions may reduce respirator performance, overexpose you to

contaminants, and may result in injury, sickness, or death.

• Always correctly position the S-100, S-300, S-400, and S-500 series hoods and loose-ﬁ tting

facepieces on the head.

• Users should be clean-shaven where the respirator's faceseal (S-100, S-300, S-400, and S-500

series products) comes into contact with their face.

• Always tuck the inner shroud of the S-403, S-607, S-707, and S-807 hood into your work

clothes.

The following instructions cover donning and ﬁ tting of your 3M hood or headcover. Follow the User

Instructions for your 3M PAPR or Supplied Air Unit to properly assemble, don, and ﬁ t your speciﬁ c air

source. Complete all necessary performance checks as described in those User Instructions and verify

that the airﬂ ow is adequate before donning your headgear and entering a contaminated environment.

1. Check that you have the appropriate size hood or headcover. Sizing Guidelines for S-Series Hoods

and Headcovers are provided in Table 1. Some models are available in more than one size. Since

the sizing guidelines are general, the best ﬁ tting size for you may depend on your facial size

and shape. Select the size that ﬁ ts most comfortably and matches your head size. An optional

size reducing pad (S-954) is available for the S-950 Premium Suspension to enhance ﬁ t of

suspension around the brow and top of the head as well as to decrease the circumference. See the

Replacement Parts and Accessories section of this User Instruction for additional information.

Table 1: Sizing Guidelines for S-Series Hoods and Headcovers

Fig. 6

Head

Circumference

(cm)

US Hat Size

Integrated

S/M

Suspension

(S-100, S-300

S-400, S-500

M/L

Series Hoods/

Headcovers)

S-950

Premium

With standard

Suspension

S-953 Comfort

(S-600, S-700,

Pad

S-800

Series Hoods)

Maximum

Optimum

2. Don the hood or headcover and connect the breathing tube.

Note: You may want to use the buddy system and have a colleague help check for proper

donning.

WARNING

6 1/4 6 3/8 6 1/2 6 5/8 6 3/4 6 7/8

7 1/8 7 1/4 7 3/8 7 1/2 7 5/8 7 3/4 7 7/8