Electrolux DF 6160 운영 및 설치 매뉴얼 - 페이지 13

{카테고리_이름} Electrolux DF 6160에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux DF 6160 20 페이지. Cooker hood
Electrolux DF 6160에 대해서도 마찬가지입니다: 작동 및 설치 지침 (22 페이지)

페이지 인쇄

Installation

Preparing the wall unit - Extractor version

• The hood is supplied as an

extractor unit.

Before installing the hood, drill a

hole in the roof of the wall unit

(see Fig. 5). This hole is to allow

passage of the outlet pipe and the

power cable, and to facilitate

servicing.

• The wall unit must have a

minimum body depth (without

door) of 300 mm with recessed

light screen and min. 370 mm with

flush-mounted light screen. The unobstructed internal height must

be at least 370 mm.

Preparing the wall unit - Filter version

• Before installation of the hood in the wall unit, a 115x115 mm hole

for the deflector should be cut in the ceiling of the wall unit. Fig. 6-7.

• Depending on the wall unit height, you need for return air operation

a pipe union or additionally a non-flammable length of pipe (Ø 100/

115/120 mm) as far as the ceiling of the wall unit.

Fig. 6

Fig. 5

Fig. 7