Electrolux DF 6260 운영 및 설치 매뉴얼 - 페이지 17

{카테고리_이름} Electrolux DF 6260에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux DF 6260 20 페이지. Cooker hood
Electrolux DF 6260에 대해서도 마찬가지입니다: 작동 및 설치 지침 (22 페이지)

페이지 인쇄

Removing the hood from the wall unit

If, for technical reasons (extraction version/recirculation version

conversion) the extractor hood has to be removed from the wall unit,

proceed as follows:

• Fully withdraw the visor and remove the grease filter.

• Loosen the 4 mounting screws of the hood (wall unit mounting).

• To loosen both mounting claws (installation aids), place a max 3

mm dia. Phillips screw-driver in the spring opening and

simultaneously press the springs inwards (towards the appliance

housing). Fig. 14.

Fig. 14

Important: Hold the hood firmly!

Adjusting the extractor part (E - Fig. 1) - Fig. 15

On wall units with a body depth of 275 mm to 335 mm, the visor depth

can be adjusted as follows:

• Remove both grease filters.

• Loosen the screws on both end-stop brackets and set the visor

depth (min. 275 mm, max. 335 mm).

• Refit the screws.

• Refit the grease filters.

Fig. 15