Electrolux E:Line ERCG9030AS 설치 및 사용자 설명서 - 페이지 5
{카테고리_이름} Electrolux E:Line ERCG9030AS에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux E:Line ERCG9030AS 12 페이지. Electrolux e:line canopy rangehoods
Electrolux E:Line ERCG9030AS에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (7 페이지)
페이지 인쇄
Dimensions
Canopy dimensions
NOTE: *The fan housing exhaust outlet is 163mm in diameter. Use
duct transition or flexible pipe supplied with the canopy rangehood
as a reducer if using 150mm optional ducting accessories.
(See page 9 for optional ducting accessories).
ERCM9010AS
ERCE9020AS
ERCG9030AS
electrolux e:line rangehoods dimensions / electrical connection 4
Electrical connection
• C heck that the mains voltage matches with the voltage
on the data plate inside the canopy rangehood.
• C heck that the installation complies with standards of
local gas and electricity authorities.
• I f the supply cord is damaged, it must be replaced by
the manufacturer or its service agent of similarly qualified
person in order to avoid a hazard.
Safety warnings – For the installer
When installing the cooker hood, make sure you adhere
to the minimum and maximum distances from the cooker
hood base to the hob surface (as per table on right page 5).
Exhaust duct installation:
The following rules must be strictly followed to obtain
optimal air extraction.
• Keep exhaust duct short and straight
• Do not reduce the size or restrict exhaust duct.
• Keep bends in the exhaust duct to a minimum.
• When using flexible duct always install duct with
helix pulled taut to minimise pressure loss.
• Failure to observe these basic instructions will
drastically reduce the performance and increase the
noise levels of the cooker hood.
Exhaust air must not be discharged into a wall cavity, unless
the cavity is designed for that purpose.
The exhaust from the cooker hood must not be discharged
into any heating flue, which may carry combustion products
from other sources.