Atlantic SP1600 사용 설명서 - 페이지 14

{카테고리_이름} Atlantic SP1600에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic SP1600 16 페이지. Oasis series skimmer, filterfalls, pump vault, fastfalls
Atlantic SP1600에 대해서도 마찬가지입니다: 제품 설명서 (12 페이지)

페이지 인쇄

1. Setting the Bf1600

Apply Atlantic's Silicone Sealant in a continuous, consistent bead along the center of the

threaded inserts. Once completed, return the liner to its dry-fit position.

Attach the supplied flange to the FastFalls, starting with the top screw first, working around

the flange. If needed, use an awl or nail to pierce the liner before inserting the screws. Do

not fully tighten any screws until all of the screws have been installed. Once completed, trim

away the liner on the inside of the flange (Figure F).

Tighten flange screws with a hand held screwdriver only. Over tightening the

screws could strip out the inserts or crack the liner flange. The screws need only to

be snug for the silicone to make a seal.

Apply silicone on the threads of the Male Thread Adaptor (MTA). Screw the MTA into the

spinweld until tight. Use PVC Glue (not included) to glue the PVC flex hose into the MTA.

HIDING THE OASIS FASTFALLS

Position rocks on either side of the Oasis

FastFalls, inside the liner (Figure D). Start

working the rock in and around the

front of the FastFalls, building up to

the lip of the FastFalls, which will

provide support for a lip rock. The

Fastfalls will support the weight of

gravel and rocks, stacked directly on

top of the unit. The FastFalls easily

supports the weight, so consider

covering the whole unit with a single

sizeable overhanging capstone, or

stack individual smaller stones and

gravel on top to completely conceal

the FastFalls (Figure G). For a 'grown-in' look, cover the FastFalls with soil and plant small

evergreens and perennials right on top. The raised lip will keep the gravel or soil from

washing into the water.

Figure F.

Figure G.