DRI Sleeper Eclipse 사용 설명서 - 페이지 5

{카테고리_이름} DRI Sleeper Eclipse에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRI Sleeper Eclipse 11 페이지.
DRI Sleeper Eclipse에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

Using double-gusset underpants

1. Cut a 25mm (1 inch) slit through one layer

only of a pair of double-gusset underpants,

down towards the crotch area. The cut can

be made on the inside or the outside of the

underwear.

2. Insert the Urosensor

black sensing strips facing the crotch.

Note: wrapping the Urosensor

inserting it into the slit in the gusset can also help bedwetting to be detected more

quickly.

Using two pairs of underpants

1. Put on two pairs of close fitting underpants.

2. Insert the Urosensor

of underpants above the crotch area. Make

sure the black sensing strips are facing the

crotch.

Note: wrapping the Urosensor

handkerchief or tissue before inserting it between

the underpants can also help the bedwetting to be detected more quickly.

Using a disposable diaper

1. With a sharp pair of scissors cut a 25mm

(1 inch) slit in the absorbent layers on the

inside of the pull-up diaper near the crotch

area.

2. With the point of the scissors create a pocket

for the Urosensor

3. Insert the Urosensor

the black sensing strips facing the crotch.

Note: As with the minipad, it is important that the Urosensor

some absorbent layers. However, disposable diapers tend to be highly absorbent

so wrapping the Urosensor

with the sensing strips facing the crotch area between the body and the diaper

inside the slit with the

™

in a paper handkerchief or tissue before

™

in between both pairs

™

in a paper

™

to slide into.

™

inside the pocket with

™

in a paper handkerchief or tissue, and inserting it

™

– 5 –

is inserted under

™