Electrolux FHWC3650RS 서비스 - 페이지 4
{카테고리_이름} Electrolux FHWC3650RS에 대한 서비스을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux FHWC3650RS 28 페이지. Range hood with electronic controls
페이지 인쇄WARNING
This service manual is intended for use by persons having electrical and mechanical training and
a level of knowledge of these subjects generally considered acceptable in the appliance repair
trade. Electrolux home products cannot be responsible, nor assume any liability, for injury or
damage of any kind arising from the use of this manual.
Before Servicing
WARNING
1.
Disconnect the power before servicing. Trip circuit breaker to the OFF position, or remove
fuse.
2.
Do not service when the range hood is working.
3.
Make sure all electrical connections are correct and secure.
4.
Make sure all electrical leads are properly dressed and secured away from sharp edges,
high-temperature components, and moving parts.
5.
Make sure all non-insulated electrical terminals, connectors, etc. are adequately spaced
away from all metal parts and panels.
6.
Make sure all safety grounds (both internal and external) are correctly and securely
connected.
7.
Make sure all panels and control board are properly and securely installed.
After testing and/or repairing
WARNING
1.
Make sure electrical supply wires are connected correctly.
2.
Make sure all safety grounds (both internal and external) are correctly and securely
connected.
3.
Reconnect all leads removed from components during testing.
4.
The internal connecting wires and motor wires should be bound tightly with bindings.
5.
Make sure parts are re-installed correctly.
6.
Make sure all the screws are tightened.
7.
Make sure all electrical leads are properly dressed and secured away from sharp edges, high-
temperature components, and moving parts.
8.
Make sure all non-insulated electrical terminals, connectors, etc. are adequately spaced
away from all metal parts and panels.
9.
Make sure all panels and control board are properly and securely installed.
Section 1 Basic Information
1-2