Electrolux Icon E36WC45FSS 사용 및 관리 매뉴얼 설치 지침 - 페이지 14
{카테고리_이름} Electrolux Icon E36WC45FSS에 대한 사용 및 관리 매뉴얼 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux Icon E36WC45FSS 24 페이지. Electrolux e36wc45fss range hood: supplementary guide
Electrolux Icon E36WC45FSS에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 공장 부품 카탈로그 (4 페이지), 사용 및 관리 매뉴얼 (24 페이지)
페이지 인쇄
14
Installation
INSTALL THE MOUNTING BRACKET
Ducted and Non-Ducted Hoods
1 Construct wood wall framing that is flush with interior surface of wall studs.
Make sure:
a the framing is centered over installation location.
b the height of the framing will allow the mounting bracket to be secured to the
2 After wall surface is installed, secure the mounting bracket to framing with (2)
4.8x38mm mounting screws. See chart below for mounting bracket location.
FRAMING
BEHIND WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT
BEHIND DRYWALL
DRYWALL
Figure 7
CEILING
DUCT
HEIGHT
METHOD
24"
DUCTED
37"
8-FEET
NON-DUCTED
37"
DUCTED OR
9-FEET
37"
NON-DUCTED
DUCTED OR
10-FEET
NON-DUCTED
WITH EXWC45S
NOTE : Minimum hood distance above cook top must not be less than 24". A maximum of 30" above
cook top is highly recommended for best capture of cooking impurities. Distances over 30" are at
the installer and user's discretion; and if ceiling height and flue lenght permit.
framing within the dimensions shown.
HOOD DISTANCE ABOVE 36" HIGH COOKTOP (SEE NOTE BELOW)
25"
26"
27"
28"
MOUNTING BRACKET LOCATION ABOVE 36" HIGH COOKTOP
38"
39"
40"
41"
38"
39"
40"
38"
39"
40"
41"
39"
40"
41"
29"
30"
42"
43"
42"
43"