Electrolux RH36WC55GS 설치, 사용 및 관리 매뉴얼 - 페이지 10

{카테고리_이름} Electrolux RH36WC55GS에 대한 설치, 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux RH36WC55GS 20 페이지. 30” et 36” hotte aspirante
Electrolux RH36WC55GS에 대해서도 마찬가지입니다: 공장 부품 카탈로그 (4 페이지), 브로셔 및 사양 (2 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), (영어) 설치, 사용 및 관리 가이드 (25 페이지), (프랑스어) 설치, 활용 및 사용 설명서 (21 페이지)

페이지 인쇄

Installing the hood

Install framing for hood support

• If drywall is present, mark the screw hole

locations. Remove the template.

• Cut away enough drywall to expose 2 vertical

studs at the holes location indicated by the

template.

Install two horizontal supports at least 1" x 6"

between two wall studs at the bottom and top

mounting holes installation location.

• The horizontal support must be flush with the

room side of the studs.

Use cleats behind both sides of the support to

secure to wall studs.

• Reinstall drywall and refinish.

IMPOR

IMPORT T T T T ANT

ANT

ANT- - - - - Framing must be capable of

IMPOR

ANT

supporting 100 lbs.

Framing must be capable of

8-1/2"min. opening for ductwork

View From Rear

1"x6" Min.

Mounting

Support

Centerline of

Installation

Space

Mounting the hood

2 people are required to lift and position the hood

onto the mounting screws.

• Place the template on the wall along the horizon-

tal line, make sure the template is leveled and

centered with the centerline.

• Mark "upper" screw holes locations in the wall.

• IMPORTANT. Check to be sure that hole locations

are leveled and correctly centered by the vertical

centerline.

• Drive "upper" wood screws by hand. Leave ¼ " of

distance between the screw head and the wall.

• Remove the grease filter and mount the hood

onto the "upper" screws.

Cleats

• Mark "lower" wood screw holes locations in the

wall using a pencil.