Electrolux RH36WC55GS 설치, 사용 및 관리 매뉴얼 - 페이지 12

{카테고리_이름} Electrolux RH36WC55GS에 대한 설치, 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux RH36WC55GS 20 페이지. 30” et 36” hotte aspirante
Electrolux RH36WC55GS에 대해서도 마찬가지입니다: 공장 부품 카탈로그 (4 페이지), 브로셔 및 사양 (2 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), (영어) 설치, 사용 및 관리 가이드 (25 페이지), (프랑스어) 설치, 활용 및 사용 설명서 (21 페이지)

페이지 인쇄

Installing the hood

Making the electrical connections

Electrical Shock Hazard

Warning: Turn off power at the service panel before

wiring this unit.

120 VAC, 15 or 20 Amp cir

120 V

AC, 15 or 20 Amp circuit r

AC, 15 or 20 Amp cir

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS FITTED WITH AN ELECTRICAL

JUNCTION BOX WITH 3 WIRES, ONE OF WHICH

(GREEN/YELLOW) SERVES TO GROUND THE

APPLIANCE. TO PROTECT YOU AGAINST

ELECTRIC SHOCK, THE GREEN AND YELLOW

WIRE MUST BE CONNECTED TO THE

GROUNDING WIRE IN YOUR

HOME ELECTRICAL SYSTEM, AND IT MUST

UNDER NO CIRCUMSTANCES BE CUT OR REMO-

VED.

Failure to do so can r

Failur

e to do so can result in death or electrical

e to do so can r

shock.

• Remove junction box cover and knockout on the

top left side.

cuit r

cuit requir

cuit r

equired.

equir

ed.

esult in death or electrical

Knockout

Junction box

cover

• If not already done, install 1/2" conduit connector

in j-box.

House

wiring

U.L. listed

wire nut

• Run black (live), white (neutral), and green (earth)

wires (#14 AWG) according to the National

Electrical Code or CSA Standards and local

codes and ordinances in 1/2" conduit from power

supply to j-box.

• Connect black, white, and green wires from

power supply to black, white, and green/yellow

wires in j-box respectively.

• These connections should be done while always

making reference to the electrical diagram found

inside the hood.

• Close j-box cover and reapply screws.

Metal electrical

conduit