Electrolux # 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Electrolux #에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux # 49 페이지. Over the range microwave oven
Electrolux #에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지), 사용 및 관리 매뉴얼 (20 페이지), 사용 및 관리 매뉴얼 (36 페이지), 사용 및 관리 매뉴얼 (24 페이지), 사용 및 관리 매뉴얼 (38 페이지), 레시피 북 (17 페이지), 지침 책자 (12 페이지), 사용 및 관리 매뉴얼 (20 페이지), 지침서 (16 페이지), 지침서 (12 페이지), 소개 매뉴얼 (16 페이지), 사용자 설명서 (11 페이지), 사용 및 관리 매뉴얼 (26 페이지), 사용 및 관리 매뉴얼 (38 페이지), 소유자 매뉴얼 (9 페이지), 사용 및 관리 매뉴얼 (16 페이지), 사용 및 관리 매뉴얼 (16 페이지), 설치 지침 매뉴얼 (21 페이지), 소유자 매뉴얼 (16 페이지), 사용 및 관리 매뉴얼 (16 페이지)

페이지 인쇄

SENSOR COOKING CONDITION

Using the SENSOR function, food is cooked without figur-

ing time, power level or quantity. When the oven senses

enough steam from the food, it relays the information to its

microprocessor which will calculate the remaining cooking

time and power level needed for best results. When the food

is cooked, water vapor is developed. the sensor "senses"

the vapor and its resistance increase gradually. When the

resistance reaches the value set according to the menu,

supplementary cooking is started.

The time of supplementary cooking is determined by experi-

ment with each food category and inputted into the LSI. An

example of how sensor works: (Potatoes)

. Potatoes at room temperature. Vapor is emitted very

slowly.

2.Heat Potatoes. Moisture and humidity is emitted very

rapidly. You can smell the aroma as it cooks.

Cooking Sequence.

. Touch one of the Sensor Cooking pads. And then touch

START/TOUCH ON pad.

NOTE: The oven should not be operated on Sensor Cooking

immediately after plugging in the unit. Wait two

minutes before cooking on Sensor Cooking.

2. The coil of shut-off relays (RY and RY3) are energized,

the oven lamp, turntable motor and cooling fan motor are

turned on, but the power transformer is not turned on.

3. After about 32 seconds, the cook relay (RY2) is energized.

The power transformer is turned on, microwave energy

is produced and first stage is started.

The 32 seconds is the cooling time required to remove

any vapor from the oven cavity and sensor.

NOTE: During this first stage, do not open the door or

4. When the sensor detects the vapor emitted from the

food, the display switches over to the remaining

cooking time and the timer counts down to zero.

At this time, the door may be opened to stir food, turn

it or season, etc.

5. When the timer reaches zero, an audible signal

sounds.The shut-off relay and cook relay are de-

energized and the power transformer, oven lamp, etc.

are turned off.

6. Opening the door or touching the STOP/CLEAR pad,

the time of day will reappear on the display and the

oven will revert to an OFF condition.

GLMV169GSB

GLMV169GBB

GLMV169GQB

PLMVZ169GCB/C

touch STOP/CLEAR pad.