Electrolux 2940 Series 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Electrolux 2940 Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 2940 Series 10 페이지. Eureka upright vacuum cleaner

PERIODIC MAINTENANCE

3. Lift hood to remove.

4. Lift left end of brush roll.

5. Remove and discard belt.

6. Place new belt around motor shaft.

7. Place new belt around brush roll pulley.

8. Align left end cap with base. Push end cap securely into

place.

9. Pull right side of brush roll to stretch belt. Secure right

end cap into base.

IMPORTANT

10. Rotate brush roll by hand 2 full rotations to properly

position belt.

11. Place hood back on cleaner. Replace and tighten two

screws.

12. Return vacuum to upright position.

(Continued)

CAUTION: Turn off the switch and unplug

How to Change Light Bulb

1. Lower handle to ﬂoor to change lightbulb.

2. Remove bottom ﬁlter cover and ﬁlter. (see page 6)

3. Remove screw from lens cover.

4. Pull old light bulb out of socket.

5. Push new lightbulb into socket.

6. Replace lens cover.

7. Secure with screw.

8. Return vacuum to upright position.

NOTE: Use automotive style 904

the electrical cord before periodic

maintenance.

SCREW

bulb only. Eureka part

number, 57940-2.