Electrolux 2940 Series 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Electrolux 2940 Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 2940 Series 10 페이지. Eureka upright vacuum cleaner

To Clear Blockages in Hose

CAUTION: Turn off the switch and unplug the

electrical cord before clearing hose.

1. Firmly pull the end of the hose from the hose retainer on

the hood of the vacuum.

2. Check for blockages in the hose and hose retainer. Flexing

the hose may help loosen any blockage. If no blockage

is found, continue to step 4.

If blockage is found, clear the blockage and replace the

hose in the hose retainer. If the blockage is in the hose

retainer and cannot be cleared, continue to step 3.

Hose

Retainer

Hose

3. Remove the hood from the cleaner and check for a

blockage in the brush roll area. Make sure the hose inlet

is clear. If no blockage is found, continue to step 4.

After the blockage is found and cleared, replace the hood

on the cleaner.

4. Twist the hose from the coupling elbow on the back of

cleaner. Check for blockages at cleaner opening and in

hose. If a blockage is found, clear the blockage.

The screw attaching the clear hose adapter can be

removed for better access to a blockage.

5. Screw the hose back onto the back of the cleaner and

replace the other end of the hose into the hose retainer

on the hood of vacuum.