Drill Master 40070 조립 및 작동 지침 매뉴얼 - 페이지 7

{카테고리_이름} Drill Master 40070에 대한 조립 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drill Master 40070 13 페이지. Orbital hand sander
Drill Master 40070에 대해서도 마찬가지입니다: 사용 설명서 및 안전 지침 (12 페이지)

페이지 인쇄
Drill Master 40070 조립 및 작동 지침 매뉴얼
wire connected to the tool's grounding system and must never be attached to an
electrically "live" terminal. (See Figure A.)
3.
Your tool must be plugged into an appropriate outlet, properly installed and grounded
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See Figure A.)

DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS

4.
Tools marked "Double Insulated" do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard
Association, and the National Electrical Code. (See Figure B.)
5.
Double insulated tools may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure B.)
SKU 40070
For technical questions, please call 1-800-444-3353.
FIGURE A
FIGURE B
Page 7