Drill Master 40070 Montaj ve Kullanım Talimatları Kılavuzu - Sayfa 7
Sander Drill Master 40070 için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları Kılavuzu indirin. Drill Master 40070 13 sayfaları. Orbital hand sander
Ayrıca Drill Master 40070 için: Kullanım Kılavuzu ve Güvenlik Talimatları (12 sayfalar)
Sayfayı Yazdır
wire connected to the tool's grounding system and must never be attached to an
electrically "live" terminal. (See Figure A.)
3.
Your tool must be plugged into an appropriate outlet, properly installed and grounded
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See Figure A.)
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
4.
Tools marked "Double Insulated" do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard
Association, and the National Electrical Code. (See Figure B.)
5.
Double insulated tools may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure B.)
SKU 40070
For technical questions, please call 1-800-444-3353.
FIGURE A
FIGURE B
Page 7