Atlas MVXA 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Atlas MVXA에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas MVXA 8 페이지. Multi-channel amplified monitor panel

페이지 인쇄

MVXA SERIES

MULTI-AMPLIFIED MONITOR PANEL

MVXA Series Back Panel View (Rear Panel Cover Removed)

15. Terminal Inputs

Each of the unit's eight or sixteen channel inputs is

independent allowing audio and visual monitoring of

any combination of 25V, 70V, and 100V, and line

level circuits. Each channel provides level indication

and is selectable to a "0" dB reference through easily

accessible jumpers. The available references are

shown in Table 1.

Since each channel is independent, the MVXA can

monitor multiple signal types. For example: Ch1

could be a line level, Ch2 the 70V output from an

amplifier, Ch3 a line level from another source, etc.

The default setting for all channels is 70V.

Table 1: Choose jumper settings to match desired 0dB reference (25, 70V, 100V, or line level).

Set Each Channel's

0dB Reference Level

1 2

Jumper Setting

Reference Voltage

Power Ref. into 8Ω

Power Ref. into 4Ω

156 Watts

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

3 4

25V

70V (Default Setting)

1 & 2

3 & 4

25Vrms

70 Vrms

78 Watts

613 Watts

1225 Watts

Specifications are subject to change without notice

AtlasSound.com

Printed in China

16. Jumpers

Jumpers are to be adjusted prior to applying power

to the MVXA monitor panel. Jumpers have an

extended tab for ease of placement.

Always put the jumpers on the same numbers. Ex: 1

& 2, 3 & 4, or 4 & 5. No jumpers are used for the 100

Volt input setting.

17. Rear Panel Cover (Not Shown)

The protective rear panel cover should be placed on

the unit after wiring to avoid accidental contact with

rear terminals. The cover has knockouts on each end

to help with wire management.

N o n e

4 5

100V

Line Level

None

4 & 5

100Vrms

1Vrms

1250 Watts

0.13 Watts

2500 Watts

0.25 Watts

TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

00606

OWNER'S MANUAL

WARNING!

Place jumpers

lengthwise only

as shown in these

diagrams!

Jumpers must be

adjusted before

applying power!

AT000384 RevB 06/06

PN 484004