Atlas Copco AME 1600 안전 및 작동 지침 매뉴얼 - 페이지 13

{카테고리_이름} Atlas Copco AME 1600에 대한 안전 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco AME 1600 20 페이지. Poker vibrator

AME 1600

1. Remove the protective cap (C) to reach the

carbon brushes (B). Use a large ﬂ at bladed

screwdriver to remove the cap.

Replacing the ﬁ lter

1. Remove the screws (A)

2. Pull out the rear cover (B)

3. Replace the ﬁ lter

4. Reﬁ t the rear cover (A)

Original instructions

Safety and operating instructions

Wiring diagram

A. Main

B. Switch

C. Rotor

D. Brush

E. Stator

NOTICE The rotation is anti-clockwise (coupling

side view)

Due to workload, ambient temperature and

vibrations caused by the vibrator poker's contact

with the concrete and/or rebar. This will cause

wear on the bearings and sealing and these will

eventually fail. When components have failed they

must be replaced with original parts. Replacement

bearing kits are available, see Spare part list.

1. Dismantle the end cap (right hand thread) and

the tube connector (left hand thread).