Atlas Copco AME 1600 Manual de instruções de segurança e de funcionamento - Página 13
Procurar online ou descarregar pdf Manual de instruções de segurança e de funcionamento para Ferramenta eléctrica Atlas Copco AME 1600. Atlas Copco AME 1600 20 páginas. Poker vibrator
AME 1600
1. Remove the protective cap (C) to reach the
carbon brushes (B). Use a large fl at bladed
screwdriver to remove the cap.
Replacing the fi lter
1. Remove the screws (A)
2. Pull out the rear cover (B)
B
3. Replace the fi lter
4. Refi t the rear cover (A)
© 2015 Construction tools PC AB | No. 9800 1713 01 | 2015-04-07
Original instructions
A
Safety and operating instructions
Wiring diagram
A. Main
B. Switch
C. Rotor
D. Brush
E. Stator
NOTICE The rotation is anti-clockwise (coupling
side view)
AT vibrator tube
Due to workload, ambient temperature and
vibrations caused by the vibrator poker's contact
with the concrete and/or rebar. This will cause
wear on the bearings and sealing and these will
eventually fail. When components have failed they
must be replaced with original parts. Replacement
bearing kits are available, see Spare part list.
1. Dismantle the end cap (right hand thread) and
the tube connector (left hand thread).
13