Atlas Copco AME 600 안전 및 작동 지침 매뉴얼 - 페이지 14

{카테고리_이름} Atlas Copco AME 600에 대한 안전 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco AME 600 20 페이지. Poker vibrators

Safety and operating instructions

1. Dismantle the end cap (right hand thread) and

the tube connector (left hand thread).

2. Loosen the square screw cap on the drive side

by locking the eccentric. Use a screwdriver to

lock the eccentric, place the screwdriver into the

groove at the end with the end cap.

3. Locate the bearings and seals to be replaced.

Pull out the eccentric together with the two

bearings the vibrator tube. Pull out from the end

with the end cap.

4. Press the two bearings out of the tube.

5. Assemble in the opposite order.

Storage

♦

Clean the machine properly before storage, in

order to avoid hazardous substances. See section

"Dust and fume hazard".

♦

Always store the machine in a dry place.

Keep the machine in a safe place, out of the reach

♦

of children and locked up.

A used machine must be treated and disposed in

such way that the greatest possible portion of the

material can be recycled and any negative influence

on the environment is kept as low as possible, and

in accordance with local restrictions.

Always send used filters and drained oil remnants

to environmentally correct disposal.

The electronic and electrical devices may contain

potentially hazardous substances. Do not dispose

of them in the nature. Dispose them according to

local laws and regulations for the country of use.

According to the European directives 2002/95/EC

and 2002/96/EC.

AME 600

Original instructions