ABSCO SHEDS 15151SK 조립 및 사용 설명서 - 페이지 12

{카테고리_이름} ABSCO SHEDS 15151SK에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS 15151SK 20 페이지. N3/c1 frame kit
ABSCO SHEDS 15151SK에 대해서도 마찬가지입니다: 조립 설명서 (20 페이지)

페이지 인쇄

BRACING FOR FRONT WALL

At the front of the shed place a horizontal

boxed section at 870mm height and tek

screw in position as shown on the right.

Make sure that the boxed section is pushed

firmly against the side wall. This will allow the

door stud to be installed later.

Now secure to the rear wall with tek screws

from outside the shed at 148mm spacings.

This is best done with two people.

TIP 1:

Cut two lengths of timber to 870mm. These

will act as a height reference guide and

help hold the horizontal braces. This makes

installation much simpler and more effective.

TIP 2:

Take a single piece of wood at 890mm. This

will act as a height template to mark the

drilling positions when outside the shed to

fix the internal bracing.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

C0660

40mm

Bracing installed on the front wall beside door.

Model: CYC15

02/03/2021

1.0