ABSCO SHEDS 15151SK 조립 및 사용 설명서 - 페이지 15

{카테고리_이름} ABSCO SHEDS 15151SK에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS 15151SK 20 페이지. N3/c1 frame kit
ABSCO SHEDS 15151SK에 대해서도 마찬가지입니다: 조립 설명서 (20 페이지)

페이지 인쇄

BRACING FOR WALLS - DOOR STUDS

Door studs are a single frame member with a cutout that allows the wall bracing to slide inside it.

S1785 has a

rebate so it fits

over the wall

brace.

1. Slide the door stud over the wall channel. Make sure that

it is properly aligned as shown on the right.

2. Fix the stud to the wall bracing with two tek screws as

shown.

NOTE: Instances where the door stud is just short of

touching the roof, At the top box in C0400 to span the gap.

3. Fix the stud to the wall sheet from outside the shed with

tek screws at a 296mm spacing.

4. Fix a multipurpose bracket, BKT17, at the top and bottom

of each door stud using tek screws as shown.

5. Repeat to stud on adjacent wall.

TEK SCREW W/ NEO

WASHER 10-16x16mm

BKT17 fixed to roof

sheet with 9 hex hd tek

screws with neoprene

washers from outside.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

HEX HD

S1785

Model: CYC15

02/03/2021

1.0