ABSCO SHEDS 15151SK Montage- en gebruikershandleiding - Pagina 15
Blader online of download pdf Montage- en gebruikershandleiding voor {categorie_naam} ABSCO SHEDS 15151SK. ABSCO SHEDS 15151SK 20 pagina's. N3/c1 frame kit
Ook voor ABSCO SHEDS 15151SK: Montagehandleiding (20 pagina's)
Pagina afdrukken
BRACING FOR WALLS - DOOR STUDS
Door studs are a single frame member with a cutout that allows the wall bracing to slide inside it.
S1785 has a
rebate so it fits
over the wall
brace.
1. Slide the door stud over the wall channel. Make sure that
it is properly aligned as shown on the right.
2. Fix the stud to the wall bracing with two tek screws as
shown.
NOTE: Instances where the door stud is just short of
touching the roof, At the top box in C0400 to span the gap.
3. Fix the stud to the wall sheet from outside the shed with
tek screws at a 296mm spacing.
4. Fix a multipurpose bracket, BKT17, at the top and bottom
of each door stud using tek screws as shown.
5. Repeat to stud on adjacent wall.
TEK SCREW W/ NEO
WASHER 10-16x16mm
BKT17 fixed to roof
sheet with 9 hex hd tek
screws with neoprene
washers from outside.
Absco Industries
Assembly Instruction Manual
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
HEX HD
S1785
Model: CYC15
02/03/2021
1.0
15