ABSCO SHEDS 15151SK 조립 및 사용 설명서 - 페이지 5
{카테고리_이름} ABSCO SHEDS 15151SK에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS 15151SK 20 페이지. N3/c1 frame kit
ABSCO SHEDS 15151SK에 대해서도 마찬가지입니다: 조립 설명서 (20 페이지)
페이지 인쇄
INSTALL EXTRA FASTENERS
Absco sheds sheets have punched holes typically spaced at 592mm from centre to centre.
To achieve a cyclonic wind rating additional screws will need to be installed to reduce these distances.
The fastener intended at these positions is FAST001, a 10mm self tapping screw.
Pre-drill and reinforce with extra screws at 148mm centres in the following locations
B - Roof panel to wall
C - Roof panel to ridge beam - inside [Not applicable to skillion models]
G - Wall sheet to wall channel - inside
Pre-drill and reinforce with extra screws at 296mm centres in the following locations
A - All sheet-to-sheet connections
D - Wall corners
E - Roof lip to sheet
F - Sheet to channel
B G
B
E
D
B
E
Absco Industries
Assembly Instruction Manual
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
A
A
F
15151GK shown for illustrative purposes.
B
E
C
A
F
Model: CYC15
B
E
B G
D
02/03/2021
1.0
5