ABSCO SHEDS 15151SK 조립 및 사용 설명서 - 페이지 6

{카테고리_이름} ABSCO SHEDS 15151SK에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS 15151SK 20 페이지. N3/c1 frame kit
ABSCO SHEDS 15151SK에 대해서도 마찬가지입니다: 조립 설명서 (20 페이지)

페이지 인쇄

INSTALL EXTRA FASTENERS - INTERIOR VIEW

"C" - Roof panel to ridge beam.

Pre-drill from inside the shed upward through the ridge beam and into the roof panel at 148mm

centres, (every pan) then fix with a screw. Some screws will already be in these positions, skip these.

For illustrative purposes fasteners are shown on just one side of the

"G" - Wall sheet to top wall channel.

Pre-drill from inside the shed through the inside face of the top channel and into the wall sheet

at 148mm centres, (every pan) and then fix with a screw. Do this on the front and back walls only.

Additional FAST001 for front wall.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

ridge beam.

Repeat again to other side.

means pre-drill 3mm hole

Additional FAST001 for rear wall

Model: CYC15

and fix with FAST001

02/03/2021

1.0