ABSCO SHEDS 15151SK 조립 및 사용 설명서 - 페이지 8

{카테고리_이름} ABSCO SHEDS 15151SK에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS 15151SK 20 페이지. N3/c1 frame kit
ABSCO SHEDS 15151SK에 대해서도 마찬가지입니다: 조립 설명서 (20 페이지)

페이지 인쇄

USING SELF DRILLING TEK SCREWS

Self drilling tek screws are an effective means of securing components without the need to pre-drill

holes. By following these instructions you will be able to easily secure your frame kit components.

Self drilling tek screws require an electric or battery

drill for installation, Do not attempt to fasten tek

screws by hand.

If available make sure that the drill has the slow

speed and high torque settings selected.

Fit the supplied driver bit into the chuck of the drill.

Place the tek screw onto the tip of the driver and

place the tek screw into position using the weight

of the drill to prevent it from moving.

Once in position apply a moderate amount of

pressure to the drill

Start slowly, begin to drill the tek screw into the

metal.

Once the tek screw has stabilised while drilling

increase the speed until the tek screw threads 'bite'

into the metal.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

Model: CYC15

02/03/2021

1.0