ABSCO SHEDS 15151SK Montaj ve Kullanım Kılavuzu - Sayfa 8
Dış Mekan Depolama ABSCO SHEDS 15151SK için çevrimiçi göz atın veya pdf Montaj ve Kullanım Kılavuzu indirin. ABSCO SHEDS 15151SK 20 sayfaları. N3/c1 frame kit
Ayrıca ABSCO SHEDS 15151SK için: Montaj Kılavuzu (20 sayfalar)
Sayfayı Yazdır
USING SELF DRILLING TEK SCREWS
Self drilling tek screws are an effective means of securing components without the need to pre-drill
holes. By following these instructions you will be able to easily secure your frame kit components.
Self drilling tek screws require an electric or battery
drill for installation, Do not attempt to fasten tek
screws by hand.
If available make sure that the drill has the slow
speed and high torque settings selected.
Fit the supplied driver bit into the chuck of the drill.
Place the tek screw onto the tip of the driver and
place the tek screw into position using the weight
of the drill to prevent it from moving.
Once in position apply a moderate amount of
pressure to the drill
Start slowly, begin to drill the tek screw into the
metal.
Once the tek screw has stabilised while drilling
increase the speed until the tek screw threads 'bite'
into the metal.
Absco Industries
Assembly Instruction Manual
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
Model: CYC15
02/03/2021
1.0
8