Atlas Copco PHE 6 S 수리 지침 - 페이지 5
{카테고리_이름} Atlas Copco PHE 6 S에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco PHE 6 S 18 페이지.
페이지 인쇄1
PHE 6 H:
Loosen both screws (4) and remove the
Detaching the
back part of the plastic housing (5).
bearing housing
2
Remove the plastic housing (1).
3
Loosen the screws (3) and remove the
nosepiece (2).
4
Loosen the screws (9) and remove the
bearing housing (8) with the O-ring (7).
5
Press the rotary shaft seal (6) from the
bearing housing (8).
1
PHE 6 S:
Insert a screwdriver (1) into one of the four
Dismantling the
service borings to lever off the round wire
spindle sleeve
ring (6). The screwdriver must remain in
the boring. Use a second screwdriver to
lever off the round wire ring through the
other service borings.
2
Take out the retainer (4) and remove the
O-ring (5).
3
Remove the recoil ring (2) and the rubber
ring (3).
4
Push out the anvil (7) with aid of a screw-
driver from the other side of the spindle
sleeve and remove the O-rings (8) from
the anvil.
5
Knock out the buffer (9) through the
grooves (A) in the spindle sleeve with aid
of a mandrel.
Repair Instructions No.181.03/98
2
1
A
PHE 6 H / PHE 6 S
3
7 6
8
9
4
5
6
1
2
3
9
8
PAGE
4
4
5
7
8
7