Atlas Copco 4220 4522 82 제품 지침 - 페이지 5

{카테고리_이름} Atlas Copco 4220 4522 82에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco 4220 4522 82 8 페이지. Operator handle

Operator handle

This instruction describes configuration of an operator handle with the

Power Focus controller. Perform the steps after installing the operator han-

dle.

1. Connect the tool and the Power Focus controller.

2. Switch on the controller.

3. Press PROG to start the configuration.

4. Select Tool and press ENTER to confirm the selection.

5. Select Configuration and press ENTER to confirm the selection.

6. Select Start and press ENTER to confirm the selection.

7. Select Tool start select source and press ENTER to confirm the selection.

8. Select Safety trigger and press ENTER to confirm the selection.

9. As a result Safety trigger appears instead of Tool trigger in the right up-

per corner.

10. Press Store to store all selected values in memory. The safety trigger is

now activated on the tool.

For more information of the Power Focus controller, see the applicable user

guide.

Instruction supplement