Bose Acoustimass 15 Series II 사용자 설명서 - 페이지 12
{카테고리_이름} Bose Acoustimass 15 Series II에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 15 Series II 18 페이지. Home entertainment speaker systems
Bose Acoustimass 15 Series II에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 빠른 설정 매뉴얼 (1 페이지), 매뉴얼 (24 페이지)
페이지 인쇄
Checking
the connections
Check all connections from the receiver to the Acoustimasg
module and from the module to
the cube speaker arrays (Figure 5 and Figure 6). Make sure all cube speaker arrays are con-
nected to the proper terminals according to their position in your room. Check that all wires
are connected to your surround receiver in phase (+ to + and - to -). Incorrect wiring can
result in a total loss of module output. Correct wiring problems before you plug your receiver
in and turn it on.
Connecting
the Acoustimass
module
to power
b Note: Bose _'recommends
using a quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components
in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be pur-
chased at an electronics store.
After you have checked all system connections,
plug the power cord of the powered Acousti-
mass module into an AC (mains) receptacle. Your Acoustimass
speaker system will turn on
and off automatically
as it receives a signal from your surround receiver.
Upgrading
your
Acoustimass
15 Series
II speaker
system
Your Acoustimass
15 Series II speaker system can be upgraded to provide you with 6.1 or
6 channel surround sound.
The 6.1 upgrade kit contains one black (PC 029661) or white (PC 029662) cube speaker array,
a 50-foot connecting cable, and complete connection
instructions.
To purchase the 6.1 upgrade kit, contact your local authorized Bose retailer or call Bose
directly. See the list of Bose offices and phone numbers enclosed with your system. When
ordering, you will need to know the serial number of your Acoustimass
module.
12
AM264924_00 _ V.pdf • August 13, 2002