Bose Acoustimass 6 Series III 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Bose Acoustimass 6 Series III에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 6 Series III 18 페이지. Home theater speaker sytem
Bose Acoustimass 6 Series III에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (1 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (25 페이지), 소유자 매뉴얼 (23 페이지)

페이지 인쇄

Setting Up

Checking the connections

Connecting the Acoustimass module to power

Check all connections from the receiver to the powered Acoustimass

module to the cube speakers (Figure 5 and Figure 6). Make sure the cube speakers are con-

nected to the proper terminals according to their position in your room. Check that the wires

are connected to your surround receiver in phase (+ to + and – to –). Correct wiring problems

before you plug your receiver in and turn it on.

Note: Bose

recommends using a quality surge suppressor on all electronics equipment. Volt-

age variations and spikes can damage electronic components in any system. A quality sup-

pressor can eliminate the vast majority of failures attributed to surges and may be purchased

at an electronics store.

After you have checked all system connections, plug the power cord of the powered Acousti-

mass module into an AC (mains) receptacle. Your Acoustimass speaker system will turn on

and off automatically as it receives a signal from your surround receiver.

module and from the