Bose Acoustimass 6 Series III Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Bose Acoustimass 6 Series III. Bose Acoustimass 6 Series III 18 stron. Home theater speaker sytem
Również dla Bose Acoustimass 6 Series III: Podręcznik szybkiej konfiguracji (1 strony), Instrukcja obsługi (44 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (25 strony), Instrukcja obsługi (23 strony)

Setting Up

Checking the connections

Check all connections from the receiver to the powered Acoustimass

module to the cube speakers (Figure 5 and Figure 6). Make sure the cube speakers are con-

nected to the proper terminals according to their position in your room. Check that the wires

are connected to your surround receiver in phase (+ to + and – to –). Correct wiring problems

before you plug your receiver in and turn it on.

Note: Bose

recommends using a quality surge suppressor on all electronics equipment. Volt-

age variations and spikes can damage electronic components in any system. A quality sup-

pressor can eliminate the vast majority of failures attributed to surges and may be purchased

at an electronics store.

After you have checked all system connections, plug the power cord of the powered Acousti-

mass module into an AC (mains) receptacle. Your Acoustimass speaker system will turn on

and off automatically as it receives a signal from your surround receiver.

module and from the