Atlas Copco ETD M120ABL V2 제품 지침 - 페이지 10

{카테고리_이름} Atlas Copco ETD M120ABL V2에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco ETD M120ABL V2 16 페이지.

Operation

Insert the bit

Turn the bit, if not seated properly

Tighten joint

Starting the tightening process depends on the installation and set-up of the tool, for example:

■

Press the start lever (A) briefly.

■

Press and hold the start lever (A) until the tightening is finished.

■

Start the tool using an external device, for example a foot switch.

The tightening result is shown with the colour of the display and status indicator:

■

Green light - tightening OK

■

Blue light - batch finished

■

Red light - faulty tightening

Starting the unscrew process depends on the installation and set-up of the tool, for example:

■

Press the reverse lever (B) briefly.

■

Press and hold the reverse lever (B) until the loosening is finished.

■

Start the tool using an external device.

ETD M120ABL V2