Bose Panaray 502A 설치 매뉴얼 - 페이지 17
{카테고리_이름} Bose Panaray 502A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Panaray 502A 32 페이지. Full-range-driver array loudspeakers
Bose Panaray 502A에 대해서도 마찬가지입니다: 기술 정보 (4 페이지), 설치 매뉴얼 (12 페이지), 매뉴얼 (4 페이지), 설치 매뉴얼 (24 페이지)
페이지 인쇄
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Series IV Loudspeaker Dimensions
- 3. Panaray 802 Series IV Loudspeaker Mounting Options
- 4. Recommended Power Amplifiers
- 5. Panaray 802 Series IV Loudspeaker Specifications
- 6. Panaray 402 Series IV Loudspeaker Specifications
- 7. Panaray 502 a Series Loudspeaker Specifications
pro.Bose.com
Mount the loudspeaker on the wall plate. Slide the fin of the speaker bracket into the wall bracket and install the
5.
M8 x 25 mm pivot screw, and then the M6 x 25 mm pitch locking screw.
Set the pitch and yaw of the loudspeaker.
6.
To set the pitch: Loosen the M8 x 25 mm screw, remove the M6 x 25 mm screw, change the angle and re-insert the
screw. Tighten both screws.
To set the yaw: loosen both screws screw, change the angle and tighten both screws.
Using an M8 x 16 mm screw, attach the safety cable to the speaker. Make sure the safety cable is attached to the wall
7.
independent of the wall plate.
CSB-5A suspension bracket kit (for indoor use only)
M8 x 1.25 x 12 mm (3)
(3)
M8 X 25 mm
M6 X 25 mm
0° to –45°
M6 X 25 mm
±60°
M8 X 25 mm
Installation
17