Bose FreeSpace E4 Series II 소유자 매뉴얼 - 페이지 25

{카테고리_이름} Bose FreeSpace E4 Series II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace E4 Series II 33 페이지. Business music system
Bose FreeSpace E4 Series II에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (4 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (15 페이지)

페이지 인쇄

Click Continue. Your Auto Volume Tracking settings are con-

firmed. If the tracking settings are not correct, click the Can-

cel button, change the settings, and start the setup process

again.

Click Continue. All sources assigned to the zone are listed in

the window. You are asked to confirm that a source is con-

nected and operating. If the source list is wrong, click the

Cancel button, use the Source Assign control panel to cor-

rect the problem and start the process again.

6.0 E4 System Setup

Click Continue to begin the source calibration setup steps.

Wait for the setup steps to be completed.

When the setup steps are done, you are asked to make vol-

ume adjustments. The maximum output gain should always

be greater than -20 dB for proper Auto Volume operation. If

the maximum output is less than -20, the source calibration

procedure might fail. If your system is too loud in this range,

change the speaker taps to a lower setting.

55 of 80

Programmer's Note: If you attempt to calibrate a

source that is already calibrated, the dialog box will tell

you that source calibration is being skipped.