Bose 1800-VI 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Bose 1800-VI에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 1800-VI 32 페이지. Professional stereo power amplifier
Bose 1800-VI에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 설치 서비스 (4 페이지)

페이지 인쇄

4.0 Installation

4.6 Input wiring

You may use 1/4" phone jacks, XLR connectors, and quick connect terminal block

connectors for the input signal with either unbalanced 2-conductor or balanced

3-conductor cables. Use shielded coaxial cable to conduct the signal from the

source (mixer, equalizer, CD player) to the amplifier.

4.6.1 Balanced operation

For the 1/4" phone jack, use a 3-conductor TRS 1/4" phone plug. The tip of the plug

carries the + (hot, non-inverting) side of the signal. The ring carries the – (low, inverting)

side of the signal. The sleeve is ground (see Figure 1).

For the XLR, use a male XLR connector. Pin 2 carries the + (hot, non-inverting) side of the

signal. Pin 3 carries the – (low, inverting) side of the signal. Pin 1 is ground (see Figure 2).

Figure 1

1/4" phone jack balanced input

connection.

Figure 2

XLR balanced input connection.