Bose 1800-VI 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Bose 1800-VI에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 1800-VI 32 페이지. Professional stereo power amplifier
Bose 1800-VI에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 설치 서비스 (4 페이지)

페이지 인쇄

For the quick connect terminal block, use the female connector provided. Pin 3 carries

the + (hot, non-inverting) side of the signal. Pin 2 carries the – (low, inverting) side of the

signal. Pin 1 is ground (see Figure 3).

If you are using the standard input module for either amplifier, the polarity of the balanced

inputs can be reversed by changing four jumpers located on the input board, just behind the

input connectors. If you are using the ACM-1 module for either amplifier, the polarity cannot

be reversed. Refer to page 12 for a description of the different modules.

4.6.2 Unbalanced operation

For the 1/4" phone jack, use a 2-conductor (tip-sleeve) 1/4" phone plug. The tip of the plug

carries the signal and the sleeve is ground. The ring connection in the jack is automatically

grounded by the sleeve (see Figure 4).

4.0 Installation

Figure 3

Quick connect terminal block

balanced input connection.

Figure 4

1/4" phone jack unbalanced

input connection.