Absen CR0.9 사용자 설명서 - 페이지 18

{카테고리_이름} Absen CR0.9에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absen CR0.9 19 페이지.

5.1 Preparation Tools

Preparation tools: Multi-meter, Module front service tools, Screwdriver, etc.

5.2 Rear Maintenance

Remove the back cover and HUB board from the back side of the cabinet to access the PCB board as the

modules can be accessed from the front. All the power supply, receiving card, and the HUB board can be

serviced by removing back cover.

Back cover

Power box

5.3 Test for short circuit

After finishing cabling the cabinets, use a multi-meter to test the AC input (L/N/PE) and DC output (VCC/GND) to

determine whether there is a short circuit. If a short circuit has been found, please examine the circuit carefully.

Power up the cabinets only after making sure all the circuits are working properly.

- 17 -

Panel

Receiving card

HUB board

Adapter plate

Leading

LED

Applications

Leading

LED

Applications

Light board

CR SeriesUserManual