Bose SoundTouch SA-4 소유자 매뉴얼 - 페이지 15
{카테고리_이름} Bose SoundTouch SA-4에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose SoundTouch SA-4 36 페이지. Amplifier
Bose SoundTouch SA-4에 대해서도 마찬가지입니다: 매뉴얼 (34 페이지), 소유자 매뉴얼 (42 페이지)
페이지 인쇄
3.
Use a small, flat-head screwdriver to connect the left speaker cable to the
L positive (+) and minus (–) terminals of the 4-pin terminal block connector,
and the right speaker cable to the R positive (+) and minus (–) terminals.
4.
Plug the terminal block connector into the SPEAKER OUTPUTS connector.
5.
Follow the operating instructions for your unpowered speakers to connect
the other end of the cables to the speakers. Make sure to connect the marked
wires to the positive terminals.
6.
Install the speakers in their permanent location.
7.
Reconnect the SA-4 amplifier to AC (mains) power.
Tip: Use a silicone caulking material such as RTV adhesive to protect
speaker wire connections. It is commonly available at hardware stores.
Bose 251
Environmental Speakers
®
shown for illustration only.
Setting up the System
English - 15