Bose A20 Aviation 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Bose A20 Aviation에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose A20 Aviation 40 페이지. Aviation headset
Bose A20 Aviation에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (43 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (44 페이지), 빠른 참조 매뉴얼 (2 페이지)

Connecting the headset to the aircraft

The Bose

A20

Aviation Headset can be configured to either plug into aircraft

power or rely entirely on battery power.

A single 6-pin plug inserted into the 6-pin connector provides the headset with

aircraft power and intercom audio.

If your headset is aircraft-powered, a 6-pin connector must be installed and mount-

ed to an aircraft panel. See "Mounting the aircraft panel connector" on page 33.

Note: An adapter is available from Bose to convert a 6-pin connector to a dual G/A or

U174 plug for additional connection flexibility.

To connect the headset

Align the 6-pin plug to the connector keyway by matching the narrow bar on the

plug to the slot on the connector.

Firmly press the plug into the connector jack.

Align keyway

To disconnect the headset

Pull back on the sleeve near the end of the 6-pin plug.

Gently continue pulling back to remove the plug from the connector.

CAUTION: Do not pull the connector out without first pulling back the sleeve. Forcing

the connector out will damage the cable and/or the aircraft instrument panel.

Pull sleeve back, then pull plug out

Sleeve

Preparing the Headset for Use

Push plug in

English - 13