Bose A20 Aviation 소유자 매뉴얼 - 페이지 30
{카테고리_이름} Bose A20 Aviation에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose A20 Aviation 44 페이지. Aviation headset
Bose A20 Aviation에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (43 페이지), 소유자 매뉴얼 (40 페이지), 소유자 매뉴얼 (44 페이지), 빠른 참조 매뉴얼 (2 페이지)
페이지 인쇄
Troubleshooting
Look for the problem in the left column of the table, then follow the "What to do"
instructions in the right column. If the problem persists, contact Bose using the
contact information on page 41 of this guide for assistance.
Warning: Do not attempt to disassemble or service the inside of the earcups or
other parts of the headset. Only the boom microphone cable, access
cover, batteries, windscreen, headband cushion, and ear cushions are
replaceable by the user. For instructions on how to care for and maintain
the headset, see "Headset Care and Maintenance" on page 25.
Noise reduction
Problem
Communication,
but no Acoustic
Noise Cancelling
®
noise reduction
in either ear
No active
Acoustic Noise
Cancelling noise
reduction and no
communication
Intercom communications
Problem
Acoustic Noise
Cancelling noise
reduction, but no
incoming audio
30 - English
What to do
• Make sure the headset is turned on.
• On the control module, check the power indicator. See page 18.
• If using aircraft power, check the aircraft fuse or circuit breaker.
• If using battery power, make sure the batteries are fresh and
correctly installed.
Warning: Replace batteries with alkaline batteries only. Do not use
any other battery chemistries.
• Make sure the headphone plugs are securely inserted into the panel
connectors.
• Try using the headset in a different seat location.
• Remove the microphone assembly from the headset and check for
damage to the connector or pins. See "The microphone assembly"
on page 10.
What to do
• On the control module, make sure the volume controls are not set
too low. See "Intercom volume controls" on page 18.
• On the intercom/radio, make sure the volume controls are not set
too low.
• Make sure the headset is firmly connected to the aircraft panel.
• Try a different seat location in the aircraft.