Elegoo MARS 4 Series 사용자 설명서 - 페이지 9

{카테고리_이름} Elegoo MARS 4 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elegoo MARS 4 Series 20 페이지.
Elegoo MARS 4 Series에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄
Elegoo MARS 4 Series 사용자 설명서
7.Press "10mm", then press "up"
10.00mm
for 10 times, and the Z axis will go
up about 100mm.
(See Picture 7)
（Picture 7）
Please set the exposure time of the test image
15
15
15
（Picture 8）
8. Press "Tool" - "Exposure" - "Select Image" - "Next" to test the projector.
(See Picture 8)
On the tempered glass of the MARS 4 DLP printer, the first image, can fully expose the
pattern of "ELEGOO TECHNOLOGY www.elegoo.com"; the second image, can fully
expose the "square frame" pattern; the third image, can perform full-screen exposure
(can be used to clean the resin tank). If the above image can be exposed normally, the
projector is in normal working condition.
9. A slight difference in brightness at different positions during exposure is normal and
will not affect the printing results.
Attention: Do not stare at the tempered glass or screen during exposure, so as not to
affect your eyesight.