Elegoo MARS 4 Series Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Impressoras 3D Elegoo MARS 4 Series. Elegoo MARS 4 Series 20 páginas.
Também para Elegoo MARS 4 Series: Manual do utilizador (20 páginas)
Imprimir página
7.Press "10mm", then press "up"
10.00mm
for 10 times, and the Z axis will go
up about 100mm.
(See Picture 7)
（Picture 7）
Please set the exposure time of the test image
15
15
15
（Picture 8）
8. Press "Tool" - "Exposure" - "Select Image" - "Next" to test the projector.
(See Picture 8)
On the tempered glass of the MARS 4 DLP printer, the first image, can fully expose the
pattern of "ELEGOO TECHNOLOGY www.elegoo.com"; the second image, can fully
expose the "square frame" pattern; the third image, can perform full-screen exposure
(can be used to clean the resin tank). If the above image can be exposed normally, the
projector is in normal working condition.
9. A slight difference in brightness at different positions during exposure is normal and
will not affect the printing results.
Attention: Do not stare at the tempered glass or screen during exposure, so as not to
affect your eyesight.