DROPSA 989004 사용자 및 유지보수 매뉴얼 - 페이지 5

{카테고리_이름} DROPSA 989004에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 989004 14 페이지.

Action to be taken prior to start up:

• Verify the integrity of the pump;

• Fill the tank with suitable lubricant (min/max indication on the tank);

• Verify that the pump is at operating temperature and the tubing free from air bubbles;

• Check that the electrical connections have been effected correctly (UNI 64/8, IEC ...);

The minimum level indicator is supplied, unless otherwise specified by the customer, with the

contact closed for minimum level. Should the user require to use a normally open contact it will be

necessary to invert the operating direction of the microswitch.

7. INSTRUCTIONS FOR USE

Verify the settings made;

Press the start button of the machine to which the 989 series

pump is connected;

Verify the starting of the pump;

Verify the adequate lubrication of the machine

(if doubt exists as to the correct functioning consult the Engineering

Department of Dropsa SpA to request test procedures).

Reservoir is refilled through lubricator "A".