Elektra Beckum BAS 315 사용 설명서 - 페이지 2
{카테고리_이름} Elektra Beckum BAS 315에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elektra Beckum BAS 315 7 페이지. Guide de precision a trois rouleaux pour scie a ruban
Elektra Beckum BAS 315에 대해서도 마찬가지입니다: 매뉴얼 (19 페이지), (프랑스어) 마누엘 (4 페이지)
페이지 인쇄
Contents
1.0
Technical Data
2.0
User Responsibility
3.0
Safety Rules for Band Saws
4.0
Initation
5.0
Operation
6.0
Additional Safety Rules
7.0
Optional Accessories
8.0
Spare Parts Lists
1.0 Technical Data
Max. height of cut
Throat capacity
Saw blade length
Saw blade width
Saw blade size
Saw blade tilt
Blade speeds:
BAS 315/55
BAS 315 Unimex
170 mm
305 mm
2250 mm
6-15 mm
400x400 mm
stepless 90° to 45°
50 Hz 370&800 m/min
60 Hz 444&960 m/,in
50/60 Hz 950/1140 m/min
Height
1265mm
Width
610mm
Depth
590 mm
Weight BAS 315/55
45kg
Weight BAS 315 Unimex
41 kg
Table height from floor
480 mm
Table height from floor with workstand
1100 mm
Motors:
0.55 kW/0.75 hp 110/115 V
0.55 kW/0.75 hp 220/240 V
Unimex 1,76kW/2.40hp 220/240 V
Unimex 2.20kW/3.00 hp 380/415 V
50/60 Hz 1-phase
50/60 Hz 1-phase
50/60 Hz 1-phase
50/60 Hz 3-phase
Standard Accessories
General purpose blade 2240x12x0,5 mm, tooth spacing 6 mm; rip fence; adaptor 100 mm diameter for
connection of dust extractor: Allen key SW 3 mm; instruction manual
2.0
User Responsibility
This machine will perform in conformity with the description contained in the manual when installed, operated,
maintained and repaired in accordance with the instructions provided.
This machine must be checked periodically. Defective equipment (including service leads) should not be used.
Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should
such repair or replacement become neccessary, it is recommended that such repairs are carried out by qualifed
persons approved by the equipment manufacturer or its representatives.
This machine or any of its parts should not be altered or changed from standard specifrications. The user of thes
machine shall have the sole responnsibility for any malfunction which results from improper use. unauthorized
modification from standard specifications, faulty maintenance, damage or improper repair be anyone otherthand
qualified persons approved by the equipment manufacturer or its representatives.
Note
The information contained in this manual is intended to help the owner/operator of this band ssaw with the setup
of the machine and the setting of cutting speeds, fences and guards. It is not a maintenance manual for servicing
and repair nor does it teach the operator how to become an expert woodworker.
Dust Collodion
We strongly recommend the use of a Dust Collector with this machine. Our Sales Department will be happy to
offer you advice on the correct collector.
3.0 Safety Rules for Band Saws
As with all power tools there is a certain amount of hazard involved with the operator and his unse of the machine.
Using the machine with the respect and caution demanded as far as safety precautions are concerned will
considerably lessen the possibility of personal injury. If, however, normal safety precautions are overlooked or
completely ignored, personal injury to the operator can develop.
This machine falls under the Woodworking Machinery Regulations 1974. For your own safety it is recommended
to follow the instructions given in the Woodworking Machines Regulations 1974 Guidance and Regulations ref.
L4 (ISBN 0118855921). This publication is available from Her Majesty's Stationary Office and other bookshops.